Beli thread go no go gauge di monotaro.id

These threaded plug gauges are used to check and inspect internal inch threads in Unified thread standards including Unified Coarse (UNC), Unified Fine (UNF), and others. Individual Go or No-Go gauge members are available or assemblies with one- or two-gauge members with a handle.

Made from the finest quality steel and thoroughly hardened, stabilised and thread ground under strict quality control procedures, ensuring a high quality product and­ ­optimum wear life.

Used to inspect female thread. The passing side and stopping side make up a single set. The thread is considered to be acceptable if the passing side passes with ease and the stopping side does not cut in after two rotations. This gauge is also used to inspect the whitworth screw.

Setting Ring OSG digunakan sebagai standar referensi untuk kalibrasi alat ukur diameter luar. Didesain dengan presisi tinggi untuk penggunaan berulang di laboratorium metrologi.

Inspection of Threaded HoleFor each screw size to be measured the corresponding gauge has standard dimensions. The gauge is used to perform GO/NO GO test based on the prescribed minimum and maximum dimensions for each screw grade.MATERIAL - Gauge part : Alloy tool steel- Handle part : Aluminum

Plug Gauge OSG memastikan akurasi ulir internal dengan standar toleransi tinggi. Digunakan untuk verifikasi GO/NO-GO dalam proses kontrol kualitas dan kalibrasi.

American Standard taper pipe threadANSI / ASME B1.20.1Taper 1:16For self-sealing pipe thread

- Top quality precision screw thread plug gauge made of fine grade alloyed tool steel.- Double-end, Go & No Go clearly marked and complete with handle.- Tolerance 6H.

Item#SCREW PITCH GAGE 4-42TPI (30) 188-101 adalah ala t yang digunakan untuk mengukur pitch pada ulir benda kerja. Ukuran pitc h benda kerja tertera pada setiap gage sehingga ukuran pitch yang diukur dapat terlihat secara langsung. Alat ini juga mempunyai lock yang ber fungsi untuk mengunci gage yang akan dipergunakan. Pitch gauge in i mempunyai ukuran 4-42TPI sehingga sangat efektif dan efisien digunakan untuk pengukuran. Pitch gauge sering digunakan di industri, pabr ik atau bengkel .

- This is a master gauge for zero point adjustment of internal diameter measuring instruments.- It has undergone sub-zero treatment and stabilization treatment to prevent aging.- Inspection report includedPurpose:As a master of internal diameter measuring instruments.

These threaded plug gauges are used to check and inspect internal inch threads in Unified thread standards including Unified Coarse (UNC), Unified Fine (UNF), and others. Individual Go or No-Go gauge members are available or assemblies with one- or two-gauge members with a handle.